News

Combination D-Sub Connectors
Feb 22, 2017


Combination D-Sub Connectors

Power, shielded, air, high voltage and signal contacts within the same connector body don't cause us a problem!  We have twenty-two connector variants in six standard shell sizes from the Positronic Combo-D rangeRead More

Complete MICTOR solutions: 38 to 152 pins
Feb 10, 2017


Complete MICTOR solutions: 38 to 152 pins

Complete Low Cost MICTOR Solutions: Extenders, Breakout Adapters, Connectors & Cables

Signal access made simple - interface an Agilent logic analyzer and oscilloscope at the same time using only one adapter...  
•    One-step secure and easy attachment; 0.25-inch square test points provide quick connection of test assemblies or test probes.
•    Four layer PCB with ground plane for reduced noise and cross talk.
•    Each signal pin number is silk-screened on the probe for easy identification.
For further information and to request a quote, please visit Mictor Breakout Boards, Adapters and Cables  Read More

High Current Power Connectors. Up to 200A per contact
Feb 08, 2017


High Current Power Connectors. Up to 200A per contact

The Goldfish series of mixed density high current, power connectors is ideal for those applications that require good blind mating in a small package. Multiple contact sizes facilitate the mixing of AC/DC input, signal and DC distributed output in a single package.
To view further specifications, please download the spec sheet and request quotes or samples hereRead More

Positronic D-sub Connectors
Feb 03, 2017


Positronic D-sub Connectors Positronic Standard D-Sub Connectors are arguably some of the highest quality d-type connectors available to design engineers.
There are a variety of d-subs suitable for both industrial and military level applications with 9 pin to 50 pin connector sizes and either fixed solder cup contacts or machined removable contacts.
Instead of spending your time searching for the right d-sub connector, use our simple D-Type Connector Finder form and we will find the best d-type solution for your application. Read More

Positronic Panther Power Connector
Jan 06, 2017


Positronic Panther Power Connector

The innovative new Panther line of rugged electronic connectors offers IP65/IP67 sealing capability; conformance to EN45525-2 HL3, a globally recognized standard for smoke and toxicity requirements; and the ability to operate reliably at temperatures up to 200ºC.
Panther also boasts up to 35 amps per contact, shock and vibration performance to EIA-364-28F test condition IV, and has an LCP insulator. The strong and versatile Panther family is ideal for use in rail, aerospace, battery, earth moving and other related applications. Read More

Compression Mount IC Development Sockets
Jan 06, 2017


Compression Mount IC Development Sockets

The ET 2300 line is a spring pin based socket system that operates at up to 23 GHz with –1dB of insertion loss. This new socket system allows the user to test and debug any BGA, QFN, QFP or other custom packages with lead pitches down to 0.5mm. Applications include development, debug, hand test, programming, test of ASIC or FPGA’s, package and chip qualification, production prototype, failure analysis and high volume production use. This socket system also gives engineers a method to test high-speed packaged semiconductors at an economical price. Read More

Waterproof Connector
Nov 14, 2016


Waterprrof Connector

• Fully Waterproof with Double Latch Solution
• Available in Wire-to-Wire and Wire-to-Board Options
• Seals preassembled into housing; no external sealing
required available in 1, 2, or 3 Positions
• True Crimp and Poke Solution
• Internal Polarization to Prevent Mismating
• Available with wire already installed
• Wide range of wire sizes available
• Waterproof Grade IP67 Certified Read More

EM360 Banding Backshell
Nov 14, 2016


EM360 Banding Backshell

The industry appetite for improved shielding effectiveness is constantly increasing. In keeping with this trend, Positronic is releasing the EM360 banding backshell for D-sub connector applications where 360° shield termination is required. The EM360 product boasts the following features:  Read More

Slim IP67 D-Sub Connector
Jan 14, 2016


Slim IP67 D-Sub Connector

CONEC SlimCon is the youngest member of the IP67 D-SUB connector family.The CONEC SlimCon series are very compact designs of IP67 tight D-SUB connectors with extremely small installation space requirements. The panel cut-out for the CONEC SlimCon series corresponds to that of other D-SUB connectors, so no new panel cut-outs are required and it is also possible to switch from standard IP20 systems to the IP67 CONEC SlimCon series.  Read More

Waterproof Mixed Combination D Subminiature Connectors - Positronic
Sep 07, 2015


Waterproof Mixed Combination D Subminiature Connectors

Ability to mix power and signal in a single connector body capable of up to 40 amps per size 8 contact  Read More


Previous 1 2 3 4 5 .. 6 Next











 Subscribe to: General Newsletter

Please complete your contact details and we will phone you back within 4 working hours.








  Subscribe to: General Newsletter












Yes
No

Please complete your contact details and we will phone you back within 4 working hours.



Sample
Quotation Request