specialist distributors of connectors and cable technology
Call +44 (0)1494 791336
Email sales@jacarem.co.uk
Jacarem is accredited to
BS EN ISO 9001:2000 quality standard
DRC Series (Heavy duty,rugged,enviro. sealed)
product brochure- The DRC Series is completely environmentally sealed using silicone seals and wire grommets that withstand engine and transmission temperatures. The thermoplastic rugged housings are designed to meet field abuse for the life of the equipment.
- By utilizing a rectangular shape, the DRC is best suited to be compatible with externally or internally mounted electronic modules. PCB applications are addressed with the DRC series receptacles being supplied with contact terminations designed for flex-tape or direct board mountings.
- Available in several insert arrangements of 24, 40, 50, 60, 70, 76 and 80.
- Crimp type: solid or stamped and formed copper alloy contacts.
- Wire seals are designed in the connector housing – no need to attach seals to wires.
Dielectric Withstanding Voltage (Test Voltage):
Current leakage less than 2 milliamps at 1500 VAC
Contact Current Rating at 125ºC (continuous):
Contact Size: Max. Current
#12 25 amps
#16 13 amps
#20 7.5 amps
Submersion:
Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage. Meets requirement of DIN 40050 IP6K9K.
Vibration:
Maintains continuity and exhibits no mechanical or physical damage during or while subject to a sinusoidal vibration, having an amplitude of .060 inches double amplitude and the frequency varied linearly between limits of 10 to 2000 to 10 Hz with a maximum force of 20 g’s. No electrical discontinuities longer than 1 microsecond.
Operative Temperature:
-55ºC to +125ºC.
Durability:
No electrical or mechanical defects after 100 cycles of engagement or disengagement.
Physical Shock:
No unlocking, unmating, or other unsatisfactory result during or after 50 g’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition “C”.
Insulation Resistance:
1000 megohms minimum at 25ºC.
Corrosion Resistance:
Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL-STD 1344, method 1001.
Take the strain out of finding a new connector for your application.
Simply fill in your requirements below and we will come back to you with some potential solutions within 4 working hours.
