specialist distributors of connectors and cable technology
Call +44 (0)1494 791336
Email sales@jacarem.co.uk
Jacarem is accredited to
BS EN ISO 9001:2000 quality standard
HD30 Series (Heavy-duty, bayonet, sealed)
product brochure- The HD30 is heavy duty and environmentally sealed, multi-pin circular connector, featuring quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, with a rear insertion / rear removal contact system.
- The HD30 Series connector was developed to meet the needs of heavy duty equipment and transportation industries.
- Available in several insert arrangements: 5 in shell size 18 and fourteen in shell size 24.
- Rugged all metal shell to withstand years of abuse.
- Positive shell keying prevents mis-mating.
- Audio and visual indications of positive locked condition.
Dielectric Withstanding Voltage (Test Voltage):
Current leakage less than 2 milliamps at 1500 VAC
Contact Current Rating at 125ºC (continuous):
Contact Size: Max. Current
#4 100 amps
#8 60 amps
#12 25 amps
#16 13 amps
#20 7.5 amps
Submersion:
Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage.
Vibration:
Maintains continuity and exhibits no mechanical or physical damage during or while subject to a sinusoidal vibration, having an amplitude of .060 inches double amplitude and the frequency varied linearly between limits of 10 to 2000 to 10 Hz with a maximum force of 20 g’s. No electrical discontinuities longer than 1 microsecond.
Operative Temperature:
-55ºC to +125ºC.
Physical Shock:
No unlocking, unmating, or other unsatisfactory result during or after 50 g’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition “C”.
Insulation Resistance:
1000 megohms minimum at 25ºC.
Corrosion Resistance:
Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL-STD 1344, method 1001.
Take the strain out of finding a new connector for your application.
Simply fill in your requirements below and we will come back to you with some potential solutions within 4 working hours.
