specialist distributors of connectors and cable technology
Call +44 (0)1494 791336
Email sales@jacarem.co.uk
Jacarem is accredited to
BS EN ISO 9001:2000 quality standard
DTP Series (Enhanced DTM, includes power contacts)
product brochure- The DTP Series offer the DTM design enhancements and the ability to incorporate power contacts in an inexpensive connector package.
- The DTP connectors are an inexpensive, high quality, environmentally sealed connector for power application.
- Available in sizes: 2 and 4 pin configurations.
- Rugged thermoplastic housing.
- Integral connector latch.
- Current rating: Size 12 contact rated at 25 Amps continuous at 125ºC.
- Fail safe secondary locks.
Dielectric Withstanding Voltage (Test Voltage):
Current leakage less than 2 milliamps at 1500 VAC
Contact Current Rating (maximum):
Size 12 contact rated at 25 amps continuous at 125ºC.
Submersion:
Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage.
Vibration:
Maintains continuity and exhibits no mechanical or physical damage after vibration levels of 20g’s at 10-2000 Hz.
Operative Temperature:
-55ºC to +125ºC at rated current.
Crimp Tensile Strength:
Size 12 contacts - 70lbs.
Physical Shock:
No unlocking, unmating, or other unsatisfactory result during or after 50 g’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition “C”.
Insulation Resistance:
1000 megohms minimum at 25ºC.
Corrosion Resistance:
Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL-STD 1344, method 1001.
Take the strain out of finding a new connector for your application.
Simply fill in your requirements below and we will come back to you with some potential solutions within 4 working hours.
