specialist distributors of connectors and cable technology
Call +44 (0)1494 791336
Email sales@jacarem.co.uk
Jacarem is accredited to
BS EN ISO 9001:2000 quality standard
DTM Series (Enhanced design of DT series)
product brochure- The DTM Series is for use in harsh environmental applications where reliable signal circuits are critical to operating performance.
- Typical applications include on or around the engine, the transmission and under the hood. In fact, everywhere data signals or critical electronic circuits go, the design of the DTM will provide reliable peak connector performance.
- Available in sizes: 2, 3, 4, 6, 8 and 12 pin.
- Rugged thermoplastic housing.
- Integral connector latch.
- Crimp contacts with option of gold or nickel finish, solid or stamped construction.
- Current rating: 7.5 Amps on all contacts at 125ºC continuous.
- Fail safe secondary locks.
Dielectric Withstanding Voltage (Test Voltage):
Sea Level- 1500 VAC (rms)
Current Rating (maximum):
20GA. – 7.5Amps continuous.
Submersion:
Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage. Also meets DIN 40050, IP6K9K.
Vibration:
Maintains continuity and exhibits no mechanical or physical damage after vibration levels of 20g’s at 10-2000 Hz.
Operative Temperature:
-55ºC to +125ºC at rated current.
Contact Retention:
Contacts withstand a minimum load of 20lbs.
Thermal Shock:
No cracking, chipping or leaking after 5 test cycles from -55ºC to +125ºC.
Insulation Resistance:
1000 megohms minimum at 25ºC.
Usable Wire Size:
Size 20 stamped and formed contacts receive conductor AWG 16-20 (1mm² to .5mm²) wire.
Size 20 solid contacts accept 20-24AWG (0.5mm² to 0.2mm²).
Rear insert will seal on smooth insulation from .053″ to .120″ O.D. (1.35mm to 3.5mm O.D.)
Durability:
No electrical or mechanical defects after 100 cycles of engagement and disengagement.
Take the strain out of finding a new connector for your application.
Simply fill in your requirements below and we will come back to you with some potential solutions within 4 working hours.
